Loading Tables on PinPad

Table loading in pinpad is called the process where the loading is done
of application information and chip parameters on the pinpad.

This process makes it possible to read a chip card during
transactions.

Normally CliSiTef does this operation automatically, under
demand, upon realizing that a new load of parameters is necessary.
There are several reasons for this, for example changing the pinpad at the POS,
or a change in the parameters of the establishment on the
authorizer.

Automation can command a new load of tables on the pinpad. Per
For example, to reduce the chance of a load on the first sale of the day, the
Automation can start a charge when in idle state
(idle) and, in this way, reduce the time for the first service.

Note that, if there is a change of parameters by the
authorizer, this change will reflect a new load of tables during the
day.

With changes in Automation

For the automation to control the loading of tables on the pinpad,
three function codes are offered that must be used in the
IniciaFuncaoSiTefInterativo.

Function 770 loads tables onto the pinpad if it is
necessary. That is, if the SiTef server data is already
loaded on the pinpad, no loading will be done.

Function 771 forces tables to be loaded onto the pinpad according to the
tables previously downloaded from the SiTef server and stored
locally at the POS.

Function 772 causes clisitef to delete local data from the
POS, downloading a new photograph of these parameters from SiTef, and then
loads tables on the pinpad.

No change to Automation

For automation to benefit from table loading without having to
program IniciaFuncaoSiTefInterativo calls with the three
Function codes 770, 771 and 772 have been included in the menu
CliSiTef Administrative, three equivalent transactions.

In the example above,

• option 11 is equivalent to Function 770;

• option 12 is equivalent to Function 771;

• option 13 is equivalent to Function 772.

To enable the Table Load transaction on the pinpad, you must
include in the [General] section the key TransacoesAdicionaisHabilitadas o
value 3624.

To enable the Forced table load transaction on the pinpad
(Local), it is necessary to include the key in the [General] section
TransacoesAdicionaisHabilitadas the value 3625.

The Forced table load transaction on the pinpad (SiTef) is
enabled by default, with the value 3626.

[General]

TransacoesAdicionaisHabilitadas=3624;3625